2025-07
I. Testing and Adjustment of Pneumatic Butterfly Valves1. Before leaving the factory, all components of butterfly valves, whether manual, pneumatic, hydrauli…
2025-06
Pneumatic control valves use compressed air as the power source, a cylinder as the actuator, and drive the valve with the help of valve positioners,
2025-05
If you do not carefully check the usage condition and performance specifications of the wafer-type electric butterfly valve before installation, the wafer-…
2025-04
Electric butterfly valve is a very common pipeline flow regulation device, widely used, involved in many fields, such as the regulation of water flow in the …
2025-03
Steam trap in the steam heating system plays a role in preventing steam drainage, choose the right trap, can make the steam heating equipment to achieve the …
2025-02
In the fluid piping system, the valve is the control element, its main role is to isolate the equipment and piping system, regulate the flow rate,
2025-02
1. Valve stem corrosion and protectionMain causes of valve stem corrosion:The corrosion damage of the valve body is mainly caused by the corrosive medium, an…
2025-01
Fixed shaft ball valve is commonly used on natural gas pipelines, and its general inspection method is: turn the valve to the fully open or fully closed po…
2024-12
1. Inspection of appearance and logoCheck content: whether the appearance of the valve has defects, such as cracks, bubbles, dents, etc. Check signage, namep…
2024-12
Ball valve has many kinds of structure, but basically the same little difference, are the opening and closing parts for the round ball core, mainly by the …