Valve sealing surface material selection factors to consider

​Sealing surface is the most critical working face of the valve, the quality of the sealing surface directly affects the service life of the valve, and the …

What are the precautions for manual operation of electric valves

​The electric actuator of valve ‍ is used to control the valve. If the valve cannot be opened and closed due to some factors, such as power failure, failur…

Working principle of pressure valve

Pressure valve is a device used in hydraulic system to control and regulate liquid flow pressure.

Six reasons for valve sealing surface damage

Because the seal plays a role in cutting and connecting, adjusting and distributing, separating and mixing media on the valve channel, the sealing surface is…

Method of preventing the regulator from getting stuck or blocked frequently

01, cleaning methodThe welding slag, rust, and residue in the pipeline cause blockage or jam in the throttle orifice, guide part, and balance hole of the low…

Valve daily maintenance guide

What is the difference between the use of butterfly valve and gate valve?

According to the role and use of gate valve and butterfly valve, the flow resistance of gate valve is small, and the sealing performance is good,

How much do you know about the 9 misunderstandings of valve installation?

Do you know the 9 misunderstandings of valve installation? Lets take a look!

What defects are prone to valve castings?

1. StomataThis is a small cavity formed in the metal by the gas that fails to escape during the solidification process, its inner wall is smooth,

Valve common problems "High pressure drop"

Due to the difference in upstream and downstream pressure, the flow of material through the valve is called pressure drop (△P) or differential pressure.